F0
F0 – Wall oven error code
MEDIUM
Code F0 indicates the wall oven control detected a fault condition. Reset power at the breaker once and retest. If F0 returns, service is recommended.
F1
F1 – Wall oven error code
MEDIUM
Code F1 means the wall oven identified an operating fault that may affect temperature consistency. Restart after cooling and monitor performance. Persistent F1 should be diagnosticsd.
F2
F2 – Wall oven error code
MEDIUM
Code F2 indicates a wall oven over-temperature or sensor-related fault. Let the cavity cool fully before retrying. If F2 repeats, request professional service.
F3
F3 – Wall oven error code
MEDIUM
Code F3 points to a wall oven sensor or control reading issue. Cooking results may be uneven until corrected. A technician should inspect repeated F3 alerts.
F4
F4 – Wall oven error code
MEDIUM
Code F4 indicates a wall oven latch, door, or related safety-state fault. Do not force the door mechanism. Service is recommended if F4 remains.
F5
F5 – Wall oven error code
MEDIUM
Code F5 means the wall oven detected an electronic switching fault. Avoid repeated use until diagnostics is complete. Professional repair is typically required.
F6
F6 – Wall oven error code
MEDIUM
Code F6 indicates a wall oven cooling or control-circuit fault condition. Let the oven cool and power cycle once. If F6 returns, schedule service.
F7
F7 – Wall oven error code
MEDIUM
Code F7 points to a wall oven interface or control communication issue. Verify controls respond normally after reset. Persistent F7 requires technician inspection.
F8
F8 – Wall oven error code
MEDIUM
Code F8 indicates a wall oven component feedback fault, often tied to probe, sensor, or board communication. Restart once and monitor. If repeated, service is needed.
F9
F9 – Wall oven error code
MEDIUM
Code F9 means the wall oven logged a general electronics fault. Perform one breaker reset and retry normal operation. If F9 persists, arrange repair service.
